Dalihigh-pressureboilertubemanufacturerContact phone address

Cutting and sizing: Cut the pipeline to the required length and perform sizing to ensure compliance with customer specifications.Mechanical performance testing: Conduct mechanical performance tests on pipelines, including tensile, hardness, and impact tests, to ensure that their performance meets standards.Outer diameter and inner diameter control: Control the tolerance of outer diameter and inner diameter to meet customer dimensional requirements.Surface treatment: To treat the surface of pipelines to improve their anti-corrosion performance, such as galvanizing, spraying, or other anti-corrosion methods.Marking and identification: Mark and identify pipelines to indicate important information such as materials, specifications, batch numbers, etc.

Dalihigh-pressureboilertubemanufacturerContact phone address

Design: The design of the pipeline must meet the specific requirements of the project and application, including pressure resistance, temperature resistance, and corrosion resistance. Reasonable design can reduce potential safety risks.Installation: When installing precision seamless steel pipes, correct installation procedures and techniques must be followed. Ensure proper connection, fixation, and support of pipelines to prevent leakage or damage. Maintenance: Regular maintenance and inspection are key to ensuring the safety of precision seamless steel pipes. Check the condition of the pipeline, promptly repair and replace aged or damaged components.

Dalihigh-pressureboilertubemanufacturerContact phone address

The specifications and wall thickness of seamless steel pipes vary depending on the application and requirements. The following are some examples of common specifications and wall thicknesses of seamless steel pipes, as introduced by the seamless steel pipe manufacturer:Specification: The specifications of Jiangsu seamless steel pipes are usually defined by their outer diameter (OD) and wall thickness (WT). For example, the specification of a seamless steel pipe may be "outer diameter 60mm, wall thickness 5mm", indicating that its outer diameter is 60mm and wall thickness is 5mm. Specifications are usually in millimeters (mm) or inches (inch).

Dalihigh-pressureboilertubemanufacturerContact phone address

Wall thickness range: The wall thickness of seamless steel pipes can vary according to different applications and requirements. The wall thickness can be very thin or very thick to meet the strength and pressure resistance requirements of specific applications. Some common wall thickness ranges include: 1mm, 2mm, 3mm, 5mm, 10mm, etc., depending on the purpose of the pipeline.Tolerance: The specifications of seamless steel pipes usually include tolerances on outer diameter and wall thickness. Tolerance refers to the allowable range of dimensional deviations. For example, a pipeline with a specification of "outer diameter 60mm and wall thickness 5mm" may have tolerances that allow for variations in outer diameter and wall thickness within a certain range.

Dalihigh-pressureboilertubemanufacturerContact phone address

Good high-temperature resistance: High pressure boiler tubes are exposed to high-temperature environments during operation, so they must have good high-temperature resistance. The material selection of high-pressure boiler tubes usually depends on the working temperature and medium. For systems with lower temperatures and moderate pressures, low alloy steel or carbon steel can be chosen; For high-temperature and high-pressure systems, it is necessary to choose high-temperature resistant steel or alloy steel. High pressure boiler tubes are usually subjected to processes such as heat treatment and annealing to ensure that they do not undergo brittle fracture at high temperatures.